Worker preparation

All of the worker nodes in the Kubernetes cluster need to be able to mount the volumes that users have provisioned for their pods.

If you are using the ontap-nas, ontap-nas-economy, ontap-nas-flexgroup driver for one of your backends, your workers will need the NFS tools. Otherwise they require the iSCSI tools.


Recent versions of CoreOS have both installed by default.


You should always reboot your worker nodes after installing the NFS or iSCSI tools, or attaching volumes to containers may fail.


Install the following system packages:


sudo yum install -y nfs-utils

Ubuntu / Debian

sudo apt-get install -y nfs-common



  1. Install the following system packages:

    sudo yum install -y lsscsi iscsi-initiator-utils sg3_utils device-mapper-multipath
  2. Enable multipathing:

    sudo mpathconf --enable --with_multipathd y
  3. Ensure that iscsid and multipathd are running:

    sudo systemctl enable iscsid multipathd
    sudo systemctl start iscsid multipathd
  4. Start and enable iscsi:

    sudo systemctl enable iscsi
    sudo systemctl start iscsi

Ubuntu / Debian

  1. Install the following system packages:

    sudo apt-get install -y open-iscsi lsscsi sg3-utils multipath-tools scsitools
  2. Enable multipathing:

    sudo tee /etc/multipath.conf <<-'EOF'
    defaults {
        user_friendly_names yes
        find_multipaths yes
    sudo systemctl enable multipath-tools.service
    sudo service multipath-tools restart
  3. Ensure that open-iscsi and multipath-tools are enabled and running:

    sudo systemctl status multipath-tools
    sudo systemctl enable open-iscsi.service
    sudo service open-iscsi start
    sudo systemctl status open-iscsi